Briquetting presses BrikStar MAGNUM 300

BrikStar MAGNUM briquetting press is manufactured with 20 years of BRIKLIS experience and the customers demand to manufacture of square shaped briquettes on a press made in Czech Republic. It is designed for medium to large plants with single-shift or multi-shift operation.

It has a compact design, modern control, reliable hydraulic pressing device, which enables the maximum compaction of material. For continuous operation, the press is equipped with an oil cooler within standard equipment. Automatic regulation of the quality of briquettes and the dispensing screw minimize fluctuation of power for pressing materials from fine to rough ones. The minimum level sensor controls the automatic start and stop of the machine, and so eliminates useless operation of the press.

The press design produces big block-shaped briquettes that can reach more than 1000 kg/m3. And so the briquettes meet the standard DIN 51731. The pressing cylinder creates a pressure up to 1200 bar on the material in the die. The 700mm long die is cooled and so the optimum pressing conditions (for pressing without added binder) and quality of briquettes are guaranteed. For certain materials the press shall be equipped with a 1.5 m long vibration damper, which extends the pressing force. The hopper of the press of bearing capacity of 1200 kg has a solid structure from hollow sections. The foot of the hoper are ready for installation of a high-capacity filtration unit.

Materials for pressing without binders

Materials for pressing should meet these conditions: moisture content from 8 to 15%, dimensions smaller than 15 mm and bulk density of at least 70 kg/m3

  • sawdust, shavings and dust from all kinds of wood including tropical ones
  • rape and grain straw, crushed power plants, flax and hemp awn
  • waste from seed cleaners, poppy-seed material
  • crushed paper, paper dust
  • textile dust and short fibres
  • industrial high-volume or dust waste from exhaust systems
  • polyurethane, some types of composite plastics

Other materials can be exposed to a performance test, which is performed by the BRIKLIS personnel in the BRIKLIS test room free of charge.

Briquette properties

The briquettes in form of a block of dimensions 135 x 65 x 80 – 100 mm with heating value 15 to 18 MJ/kg can be combusted in all types of stoves, boilers and incinerators for combustion of solid fuels. The block shaped briquettes are optimal for packaging. The briquettes are packed up in PE bags or paper bags by 10 kg. The bags are easily placed on a pallet, and fixed by a stretch foil.

The volume of waste is decreased eight times by briquetting, and so the transport and storage are cheaper. Big benefit of the briquetting presses is the usage of wastes and the reduction of the dust in plants.

Standard equipment

  • Briquette transportation to the wrapping place
  • Minimum level sensor
  • Inspection door in the hopper
  • Oil cooler
  • Cooled die

How to determine necessary capacity of the press?

Would you like us to explain some parts with more details? What other information you may require?

Please do not hesitate to contact us. It´s a pleasure to answer your questions.

Thank you. e-mail to info@briklis.cz

Main advantages of BrikStar MAGNUM press

  • Reinforced solid structure of the hopper, legs from a steel frame
  • Block-shaped briquettes, water-cooled die
  • Minimum installation costs, reduced dust formation
  • Direct connection to the central exhaust system
  • Computer controlled dosing
  • Automatic regulation of the length and quality of briquettes
  • Adaptation to changing material properties
  • Extracting cutter with separate drive
  • Low wear, perfect workmanship
  • Possibility of unattended operation
  • Comprehensive supply, quick service
  • Possibility of integration in the BRISUR line including saw dust drying

Technical parameters

Type Output, kg/hour+-10% Installed electric input Press weight násypka Hopper type – 16
BrikStar MAGNUM 300 250 – 500 26,5 kW 3060 kg

Press capacity of up to 500 kg/hour requires continuous supply of big amount of material of approx. 5 m3 per hour. The press output per hour depends on specific weight of the processed material. Heavier materials, such as saw dust, are dosed more quickly, and so the time necessary for production of one briquette is shorter, and the output is higher.

Technical and operating conditions
Permissible moisture of input material 8-15 hm%
Specific weight of the pressed briquette 700 – 1100 kg/m3
Maximum operating pressure 180 bar (18 MPa)
Maximum operating temperature 60 °C
Machine working environment +5 – +35 °C

General technical parameters
Supply voltage 400 V
Control voltage 24 V
Electrical element protection IP54
Machine noise level 77 dB
Operating time of the press 3 shifts

Dimensions of presses

The press with one pressing frame at one hopper with an oil cooler

Hopper type Length Width Height Hopper width
2 m3 Výkres 2290 2610 1400 1610

 

 

Comments are closed.