Briquetting presses BrikStar CS 25, 50

BrikStar briquetting presses are manufactured with 20 years of BRIKLIS experience.

They are suitable for small plants with single-shift operation.

They feature compact design, modern control, reliable hydraulic pressing device, which enables maximum compaction of material. Automatic regulation of the quality of briquettes and the dispensing screw minimize fluctuation of power for pressing materials from fine to rough ones. The press stops automatically, when the material is removed from the hopper,. And after the minimum level sensor detects new material, the press is restarted. For continuous operation, the press cannot be equipped with the oil cooler.

General informationMain advantagesTechnical parametres

Materials for pressing without binders

Materials for pressing should meet these conditions: moisture content from 8 to 15%, dimensions smaller than 15 mm and bulk density of at least 70 kg/m3

  • sawdust, shavings and dust from all kinds of wood including tropical ones
  • rape and grain straw, crushed power plants, flax and hemp awn
  • waste from seed cleaners, poppy-seed material
  • crushed paper, paper dust
  • textile dust and short fibres
  • industrial high-volume or dust waste from exhaust systems
  • polyurethane, some types of composite plastics

Other materials can be exposed to a performance test, which is performed by the BRIKLIS personnel in the BRIKLIS test room free of charge.

Briquette properties

The briquettes have a shape of a cylinder of diameter 65 mm, length 30 to 50 mm, heating value of 15 to 18 MJ/kg. They can be combusted in all types of stoves, boilers and incinerators for combustion of solid fuels. Their high heating value is better used in gasifying boilers.

The volume of waste is decreased eight times by briquetting, and consequently waste transport and storage is cheaper. Big benefit of the briquetting presses is utilization of wastes and reduction of dust in plants.

Standard equipment

  • Press hopper volume 0.7 m3
  • Briquette guiding 2 plastic elbows

Other information


How to determine necessary capacity of the press?


How large area is possible to heat out with briquettes?

Would you like us to explain some parts with more details? What other information you may require?

Please do not hesitate to contact us. It´s a pleasure to answer your questions.

Thank you. e-mail to

Main advantages in the usage of briquetting presse

  • Low installation and maintenance costs
  • Low power consumption
  • Direct connection to the central exhaust system
  • Outdoor version to be placed under the silo
  • Computer-controlled dosing
  • Automatic regulation of the length and quality of briquettes
  • Extracting cutter with separate drive
  • Compact design, rugged pressing frame
  • Easy operation, quick service
  • Comprehensive supply, individual approach
  • Perfect workmanship, 20 years of experience
  • Servicing and upgrading even for older types of our presses

Technical parameters

Type Output, kg/hour +-10% Installed electric input Press weight hopper 0.7 m3
BrikStar CS 25 20 – 40 4,4 kW 720 kg
BrikStar CS 50 40 – 60 5,4 kW 730 kg
Technical and operating conditions
Permissible moisture of input material 8-15 hm%
Specific weight of the pressed briquette 700 – 1100 kg/m3
Maximum operating pressure 180 bar (18 MPa)
Maximum operating temperature 60 °C
Machine working environment +5 – +35 °C
General technical parameters
Supply voltage 400 V
Control voltage 24 V
Electrical element protection IP54
Machine noise level 77 dB
Operating time of the press 1 shift – limited by oil temperature

Dimensions of the press

Hopper volume m3 Length, mm Width, mm Height, mm Hopper width, mm
0 7 Výkres 1400 1540 1070 1200

Comments are closed.