Briquetting press BrikStar 30, 50, 70

BrikStar briquetting presses are manufactured with 20 years of BRIKLIS experience. They are designed for small to medium plants with single-shift or multi-shift operation.

They feature compact design, modern control, reliable hydraulic pressing device, which enables maximum compaction of material. For continuous operation, they can be equipped with an oil cooler. Automatic regulation of the quality of briquettes and the dispensing screw minimize fluctuation of power for pressing materials from fine to rough ones. The minimum level sensor controls the automatic start and stop of the machine, and so eliminates useless operation of the press.

Materials for pressing without binders

Materials for pressing should meet these conditions: moisture content from 8 to 15%, dimensions smaller than 15 mm and bulk density of at least 70 kg/m3

  • sawdust, shavings and dust from all kinds of wood including tropical ones
  • rape and grain straw, crushed power plants, flax and hemp awn
  • waste from seed cleaners, poppy-seed material
  • crushed paper, paper dust
  • textile dust and short fibres
  • industrial high-volume or dust waste from exhaust systems
  • polyurethane, some types of composite plastics

Other materials can be exposed to a performance test, which is performed by the BRIKLIS personnel in the BRIKLIS test room free of charge.

Briquette properties

The briquettes have a shape of a cylinder of diameter 65 mm, length 30 to 50 mm, heating value of 15 to 18 MJ/kg. They can be combusted in all types of stoves, boilers and incinerators for combustion of solid fuels. Their high heating value is better used in gasifying boilers.

The volume of waste is decreased eight times by briquetting, the waste transport and storage are cheaper. Big benefit of the briquetting presses is utilization of wastes and reduction of dust in plants.

Standard equipment

  • Briquette guiding – 2 plastic elbows
  • Minimum level sensor
  • Inspection door

How to determine necessary capacity of the press?

How large area is possible to heat out with briquettes?

Would you like us to explain some parts with more details? What other information you may require?

Please do not hesitate to contact us. It´s a pleasure to answer your questions.

Thank you. e-mail to info@briklis.cz

Technical parameters

Type Output, kg/hour+-10% Installed electric input Press weight Hopper type – 12 Press weight Hopper type – 16 Press weight Hopper type – 19
BrikStar 30 20 – 40 kg/hod 4,4 kW 780 kg 870 kg 960 kg
BrikStar 50 40 – 60 kg/hod 5,4 kW 790 kg 880 kg 970 kg
BrikStar 70 50 – 80 kg/hod 6,9 kW 840 kg 905 kg 1 025 kg
Technical and operating conditions
Permissible moisture of input material 8-15 hm%
Specific weight of the pressed briquette 900 – 1100 kg/m3
Maximum operating pressure 180 bar (18 MPa)
Maximum operating temperature 60 °C
Machine working environment +5 – +35 °C
General technical parameters
Supply voltage 400 V
Control voltage 24 V
Electrical element protection IP54
Machine noise level 77 dB
Operating time of the press 1 shift – limited by oil temperature

Dimensions of the press

Presses with a hydraulic unit under the hopper, without an oil cooler

Hopper type Hopper volume Length Width Height Hopper width
12 Výkres 1m3 1400 1540 1300 1200
16 Výkres 2m3 1730 2000 1300 1660
19 Výkres 3m3 2010 2260 1300 1920

 

Comments are closed.