Briquetting presses BrikStar 200, 300, 400
BrikStar briquetting presses are manufactured with 20 years of BRIKLIS experience.
They are designed for medium to large plants with one-shift or multi-shift operation.
They feature compact design, modern control, reliable hydraulic pressing device, which enables maximum compaction of material. For continuous operation, they are completed by an oil cooler within standard equipment. Automatic regulation of the quality of briquettes and the dispensing screw minimize fluctuation of power for pressing materials from fine to rough ones. The minimum level sensor controls automatic start and stop of the machine, and so eliminates useless operation of the press.
Materials for pressing without binders
Materials for pressing should meet these conditions: moisture content from 8 to 15%, dimensions smaller than 15 mm and bulk density of at least 70 kg/m3
- sawdust, shavings and dust from all kinds of wood including tropical ones
- rape and grain straw, crushed power plants, flax and hemp awn
- waste from seed cleaners, poppy-seed material
- crushed paper, paper dust
- textile dust and short fibres
- industrial high-volume or dust waste from exhaust systems
- polyurethane, some types of composite plastics
Other materials can be exposed to a performance test, which is performed by the BRIKLIS personnel in the BRIKLIS test room free of charge.
Briquette properties
The briquettes have a shape of a cylinder of diameter 55 mm, length 50 to 70 mm, heating value of 15 to 18 MJ/kg. They can be combusted in all types of stoves, boilers and incinerators for combustion of solid fuels. Their high heating value is better used in gasifying boilers.
The volume of waste is decreased eight times by briquetting, and consequently waste transport and storage is cheaper. Big benefit of the briquetting presses is utilization of wastes and reduction of dust in plants.
Standard equipment
- Briquette guiding – 2 plastic elbows
- Minimum level sensor
- Inspection door
- Oil cooler
Other information
Would you like us to explain some parts with more details? What other information you may require?
Please do not hesitate to contact us. It´s a pleasure to answer your questions.
Thank you. e-mail to info@briklis.cz
Technical parameters
| Type | Output, kg/hour+-10% | Installed electric input | Press weight násypka Hopper type – 12 | Press weight Hopper type – 16 | Press weight Hopper type – 19 |
|---|---|---|---|---|---|
| BrikStar 200 | 180 – 220 | 16 kW | - | 1450 kg | 1550 kg |
| BrikStar 300 | 280 – 320 | 20 kW | - | 1550 kg | 1650 kg |
| BrikStar 400 | 380 – 420 | 32 kW | - | - | 2500 kg |
| Technical and operating conditions | |
|---|---|
| Permissible moisture of input material | 8-15 hm% |
| Specific weight of the pressed briquette | 700 – 1100 kg/m3 |
| Maximum operating pressure | 180 bar (18 MPa) |
| Maximum operating temperature | 60 °C |
| Machine working environment | +5 – +35 °C |
| General technical parameters | |
|---|---|
| Supply voltage | 400 V |
| Control voltage | 24 V |
| Electrical element protection | IP54 |
| Machine noise level | 80 dB |
| Operating time of the press | 3 shifts |
Dimensions of presses
BrikStar 200, 300
Presses with two pressing frames at one hopper with an oil cooler
| Hopper type | Length, mm | Width, mm | Height, mm | Hopper width,mm | |
|---|---|---|---|---|---|
| 16 | Výkres | 2250 | 2260 | 1360 | 1660 |
| 19 | Výkres | 2244 | 2390 | 1430 | 1820 |
BrikStar 400
A press with four pressing frames at one hopper and with a separate hydraulic unit and an oil cooler
| Hopper type | Length | Width | Height | Hopper width | |
|---|---|---|---|---|---|
| 19 | Výkres | 4590 | 2930 | 1710 | 1820 |
